Granular Iron Oxide Desulfurization Remove Sulfur Recovery Catalyst Agent

Product Description

Product Description

 

 

Fe2o3 15-30% Remove H2s Iron Ferric Oxide Desulfurizer for Biogas Plant

Product Introduction :

Ferric Oxide Desulfurizer is a solid desulfurizer with iron oxide as the main active ingredient. It is processed by adding different catalysts. The appearance of the product is brown and yellow granular. It has large sulfur capacity, high essence, high strength and no muddy water. It is easy to regenerate and can also remove hydrogen sulfide with high precision under anaerobic conditions. Between 20 ° C ~ 100 ° C, the hydrogen sulfide has a high removal performance, the thiol organic sulfur and most of the nitrogen oxides also have a certain removal effect.
 
   The working principle of Ferric Oxide Desulfurizer is to adsorb the sulfur-containing compound in the exhaust gas into the small hole of the desulfurizing agent, thereby purifying the gas. When the desulfurizing agent reaches saturation, that is, it no longer has the desulfurization ability, it needs to be regenerated, such as steam vapour regeneration. However, after long-term use, the activity of the iron oxide desulfurizer will continue to decrease. If the pores are blocked by some impurities, the desulfurizer will lose the active ingredient.
 

 

Product Specifications

 

Product specifications:
 

Appearance	Claybank columnars
Diameter	3-5	3-5	3-5	3-5
Length(mm)	5-15	5-15	5-15	5-15
Bulk density(kg/L)	0.7±0.05	0.7±0.05	0.7±0.05	0.7±0.05
Side Pressure(N/cm)	≥40	≥40	≥40	≥40
Moisture	≤10%	≤10%	≤10%	≤10%
Water Capacity	≥45%	≥45%	≥45%	≥40%
Porosity(%)	40-50	40-50	40-50	40-50
Desulfurization precision(ppm)	≤0.10	≤0.50	≤1.0	≤5.0
Saturation sulfur capacity (mg/g)	700-800	≥600	≥550	≥500

Main Products:




 

Product Parameters

 

Advantages of Iron Oxide Desulfurizer:


1. H2S removal through dry method in room temperature, renewable material
 
2. Quick reaction: Space velocity: 1000~3000h-1, penetration space velocity: 6000h-1, twice to four-time of normal iron oxide
 
3. Large sulfur degree, high purification degree, reaching 25% in the condition of space velocity 1000h-1, normal pressure, water saturation, import H2S 1%, export H2S≤5×10-8 particle
 
4. High strength, good water tolerance, no pulverization under the condition of boiling by 2 hours or soaking by 30 days, and the strength remain the same as before, even in the condition of sudden pressurizing or relief with 12MPa, and undergoing blow test 100 times
 
5. Large applicable scope, 10~100°C without obvious change of sulfur content
 
6. In the condition of no O2 or large CO2content conditions, the sulfur content won't alter


Operate Condition:

1 Air speed : coal gas :300-800h-1 
2 Temperature: 15-55°C
3 Pressure: normal-8.0MPa
4 Time: ≥45second

 

Application

 

1)It is widely used in fertilizer,chemical,petrochemical,coal chemical etc. Industry raw material
 
2) the removal of hydrogen sulfide in process gas,the dry removal of H2S in the sulfur-bearing gas such as naturalgas,watergas,semi-water gas,carbon gas,shift gas,coke oven gas,liquefide
gas,CO2and city gas.
 
3)It also has good effect of organic sulfur's desulfurization.


 

Plant equipment

Our Factory:






 

Packaging & Shipping

Product Packing and Delivery:

1. Big bag :500kg/600kg jumbo bag
2. Small bag:25kg/20kg PP bag
3. 25kg Kraft paper bag
4. According to your requirements

     Shipping :
     1.20GP FCL  :25TONS
     2.40GP FCL:  25TONS
     3.40HQ FCL: 25TONS
    The above quantity without pallet ,the goods will be sent within 7-15days after receiving your order.